Fiber Monday

 

In Which Seeeeeecret Project is finally updated!

I'm sure you're tired by now of all my excuses so behold:

One Very Annoying Strap.

The strap above is made entirely with slip stitches and that is why it took for-freaking-ever. But now it's... done? Maybe? We'll see when I start to attach things. I also started a similarly slip-stitched loop for the top of the mushroom cap! I've been working on this bag for so long that I keep losing track of how to do things, but if you look up the "secret project" tag, you can find the whole pattern up to this point!

I've also been struggling a lot to try to structure this project. You see, crochet thread? it's super duper floppy. It won't look good in glamor shots if it's super floppy, so how do I hold the mouth of the bag open? I tried so many ways to do things - wires, strengthening things with plastic, and even zip ties! And yet none of them worked well.

Today I just went ahead and did it - I added wire.

Fortunately I had some cheap $1 jewelry wire that I used on the mouths of the lower part of the bag, and then I used thin copper wire around the bottom of the cap. The thin wire is purely aesthetic - I'll be stiffening the base of the cap with thin plastic of some sort (or possibly craft foam if I find some), and that will hold it against various things being stored in the cap!

The plastic tie failure - they were only top-closure, I'd need side-closure

The jewelry wire is still quite pliable so I doubled it up!

And I attached the wire using single crochet through each dc from either mouth

I think it came out pretty well!

The copper wire was harder because it's thinner, softer, and I measured wrong!
Measure twice! Cut once! Then you don't poke yourself with twisted wire lol

The bag assembled & reinforced!

Hopefully today's blog has helped someone trying to figure out how to create structure in a project. Here's some additional advice: grab sandpaper to round off the cut ends of your wire so it hurts less when it pokes you.

So now we just have a few more things to do!

• Finish/attach straps
• Make and attach spots for the cap!
• Add the final structure elements
• Make a closure for the stem (maybe a braided cord?)

That doesn't seem like so much when you look at it that way!

And that's gonna do it from me for tonight. I'm pooped!

Go Enjoy Something!

FC

Fiber Monday

 

In Which Attempts Were Made

Last week, we finished the cap on our Secret Project/Mystery Project, aka the Mushroom Bag, and this week, we're left to experiment. First, I wanted to experiment with ways to hold open the bottom opening.

I decided to use some very low grade jewelry wire I have had laying around, but I'm very unhappy with the way it's turning out. I'll have to undo it and start over.

Specifically, I'm unhappy with how the wire bunches and twists

I am quite disappointed in the stiff-yet-wobbly nature of that wire, though I can see myself making a couple of rings, covering them in ribbon, and sewing them in place to hold the gill portion stiffer.

Now, it's unfortunate, but I only found two different "mushroom" stitches. One was from a YouTuber called Crochet With Samra, and the other was from Fiber Spider. I have my concerns with using the very lovely but delicate stitch from Samra as straps, but as you can see below, even a single repeat of the Mushroom stitch from Fiber Spider is a bit... broad and loud for a strap for such an oddly-shaped bag? I have dilemmas. 

She a thicc band

If anyone out there has better suggestions on a mushroom-themed strap I could whip up out of natural-colored, red, and/or white thread, please let me know!

Also I still need to wash the bag because she is a dirty dirty bag.

For now, though, I'm going to relax and try to figure out some ways to fix what I've borked, test out new designs, etc!

Go Enjoy Something!

FC

Fiber Monday

 

WE ARE FINALLY DONE WITH RED!
sort of...

My friends, it's finally happened. We hit the end of our interminable red section! We'll be able to start on decorations, closures, and hardware now! And I'm still working on figuring out how any of those work lol.

I have a few ideas of how the straps might work, but aside from that I think I need to just troubleshoot for a bit.

Here's how it's gone so far:

With Beige thread

Round 1: sc 6 into magic ring (6 sc)

R2: 2sc around (12 sc)

R3: [2sc, sc] around (18 sc)

R4: [sc, 2sc, sc] (24 sc)

R5: [2sc, sc in next 3 sts] (30 sc)

R6: sc around (30 sc)

R7: [sc in next 2 sts, 2sc, sc in next 2 sts] around (36 sc)

R8: [2sc, sc in next 5 sts] around (42 sc)

R9: [sc in next 3 sts, 2sc, sc in next 3 sts] around (48 sc)

R10: [2sc, sc in next 7 sts] around (54 sts)

R11: [sc in next 4 sts, 2sc, sc in next 4 sts] around (60 sc)

R12-13: sc around (60 sc)

R14: [2sc, sc in next 9 sts] around (66 sc)

R15: [sc in next 5 sts, 2sc, sc in next 5 sts] around (72 sc)

R16: [2sc, sc in next 11 sts] around (78 sc)

R17: [sc in next 6 sts, 2sc, sc in next 6 sts] around (84 sc)

R18: [2sc, sc in next 13 sts] around (90 sc)

R19-21: sc around (90 sc)

R22: [sc in next 7 sts, 2sc, sc in next 7 sts] around (96 sc)

R23: [2sc, sc in next 15 sts] around (102 sc)

R24: [sc in next 8 sts, 2sc, sc in next 8 sts] around (108 sc)

R25: [2sc, sc in next 17 sts] around (114 sc)

R26: [sc in next 9 sts, 2sc, sc in next 9 sts] around (120 sc)

R27-30: sc around (120 sc)

R31: [2sc, sc in next 19 sts] around (126 sc)

R32: [sc in next 10 sts, 2sc, sc in next 10 sts] around (132 sc)

R33: [2sc, sc in next 21 sts] around (138 sc)

R34: [sc in next 11 sts, 2sc, sc in next 11 sts] around (144 sc)

R35: [2sc, sc in next 23 sts] around (150 sc)

R36-40: sc around (150 sc)

R41: [sc 2 together, sc 23] around (144 sc)

R42-47: sc around (144 sc)

R48: [sc 11, sc 2 together, sc 11] around (138 sc)

R49-55: sc around (138 sc)

R56: [sc 2 together, sc 21] around (132 sc)

R57-64: sc around (132sc)

R65: [sc 10, sc 2 tog, sc 10] around (126 sc)

R66-74: sc around (126 sc)

R75: [sc 2 tog, sc 19] around (120 sc)

R76-84: sc around (120 sc)

R85: sc around, sl st to first sc (120 sc)

R86: ch3 (counts as 1st dc), dc in each sc around, sl st in top of ch3 (120 sc)

R87: ch3 (counts as 1st dc), dc in next 10 dc; yarn over, insert hook into next dc, pull through 1 loop, yarn over, pull through 2 loops, yarn over, pull through 2 loops (does not count as 1st foundation dc), foundation dc next 96 stitches, then (being careful not to twist) dc in the 12th dc from the end of the round, dc to the end of the round (24 dc, 96 foundation dc = 120 dc); sl st to top of ch3, fasten off.

You should now have something that looks like a hinged ring or a handle attached to an odd, pear-shaped pouch. Now we’ll begin the underside of the lid (this is going to be weird, I’m sorry).

Form a magic ring from the same color as you’ve been using. I use a double-magic-ring for added security but you can start this in the round however you like.

R1: ch3 (counts as 1st dc here and throughout), dc 11 in ring, sl st to the top of the ch3 (12dc)

R2: ch3, fpdc in same dc, (dc in next dc, fpdc in same dc) around, sl st to top of ch3 (12dc, 12fpdc = 24st)

R3: ch3, dc in next st, fpdc in fpdc (dc in next 2 st, fpdc in fpdc) around, sl st to top of ch3 (24dc, 12fpdc = 36st)

R4: ch3, dc in next 2 sts, fpdc in fpdc (dc in next 3 sts, fpdc in fpdc) around, sl st to top of ch3 (36dc, 12fpdc = 48st)

R5: ch3, dc in next 3 sts, fpdc in fpdc (dc in next 4 sts, fpdc in fpdc) around, sl st to top of ch3 (48dc, 12fpdc = 60st)

R6: ch3, dc in next 4 sts, fpdc in fpdc (dc in next 5 sts, fpdc in fpdc) around, sl st to top of ch3 (60dc, 12fpdc = 72st)

R7: ch3, dc in next 5 sts, fpdc in fpdc (dc in next 6 sts, fpdc in fpdc) around, sl st to top of ch3 (72dc, 12fpdc = 84st)

R8: ch3, dc in next 6 sts, fpdc in fpdc (dc in next 7 sts, fpdc in fpdc) around, sl st to top of ch3 (84dc, 12fpdc = 96st)

R9: ch3, dc in next 7 sts, fpdc in fpdc (dc in next 8 sts, fpdc in fpdc) around, sl st to top of ch3 (96dc, 12fpdc = 108st)

R10: ch3, dc in next 8 sts, fpdc in fpdc (dc in next 9 sts, fpdc in fpdc) around, sl st to top of ch3 (108dc, 12fpdc = 120st)

Take your hook out of the disc you formed (which we will now refer to as the “Lid”), then choose a spot to attach it to on the weird flap/hinge part of the first piece (which we’ll now refer to as the “Body”). With the ridged pattern facing downward (towards the open mouth of the Body), insert your hook back through one stitch of the Body’s hinge/flap and back into the loop of the Lid. We will be making our stitches through the hinge/flap stitches and back into the Lid for this round.

R11: ch3 (pull the first loop all the way through the hinge/flap stitch to make your 1st ch), dc in next 9 dc going through the corresponding flap/hinge stitches as you go; on the next stitch, do not go back through the hinge/flap stitch to make your fpdc in fpdc; (dc in next 10 dc, fpdc in fpdc) around until the last fpdc, which is basically impossible (if you figure it out, great!) so just fake it til you make it; sl st in top of ch3. (120dc + 12fpdc = 132 sts)

You should have something that looks a bit like a sand dollar stuck in a ring.

R12: ch3, dc in next 10 dc, fpdc in fpdc; (dc in next 11 dc, fpdc in fpdc) around, sl st in top of ch3 (132dc + 12fpdc = 144 sts)

R13: ch3, dc in next 11 dc, fpdc in fpdc; (dc in next 12 dc, fpdc in fpdc) around, sl st in top of ch3 (144dc + 12fpdc = 156 sts)

R14: ch3, dc in next 12 dc, fpdc in fpdc; (dc in next 13 dc, fpdc in fpdc) around, sl st in top of ch3 (156dc + 12fpdc = 168sts)

R15: ch3, dc in next 13 dc, fpdc in fpdc; (dc in next 14 dc, fpdc in fpdc) around, sl st in top of ch3 (168dc + 12fpdc = 180sts)

R16: ch3, dc in next 14 dc, fpdc in fpdc; (dc in next 15 dc, fpdc in fpdc) around, sl st in top of ch3 (180dc + 12fpdc = 192sts)

R17: ch3, dc in next 15 dc, fpdc in fpdc; (dc in next 16 dc, fpdc in fpdc) around, sl st in top of ch3 (192dc + 12fpdc = 204sts)

R18: ch3, dc in next 16 dc, fpdc in fpdc; (dc in next 17 dc, fpdc in fpdc) around, sl st in top of ch3 (204dc + 12fpdc = 216sts)

R19: ch3, dc in next 17 dc, fpdc in fpdc; (dc in next 18 dc, fpdc in fpdc) around, sl st in top of ch3 (216dc + 12fpdc = 228sts)

R20: ch3, dc in next 18 dc, fpdc in fpdc; (dc in next 19 dc, fpdc in fpdc) around, sl st in top of ch3 (228dc + 12fpdc = 240sts)

R21: ch3, dc in next 19 dc, fpdc in fpdc; (dc in next 20 dc, fpdc in fpdc) around, sl st in top of ch3 (240dc + 12fpdc = 252sts)

R22: ch3, dc in next 20 dc, fpdc in fpdc; (dc in next 21 dc, fpdc in fpdc) around, sl st in top of ch3 (252dc + 12fpdc = 264sts)

R23: ch3, dc in next 21 dc, fpdc in fpdc; (dc in next 22 dc, fpdc in fpdc) around, sl st in top of ch3 (264dc + 12fpdc = 276sts)

R24: ch3, dc in next 22 dc, fpdc in fpdc; (dc in next 23 dc, fpdc in fpdc) around, sl st in top of ch3 (276dc + 12fpdc = 288sts)

R25: ch3, dc in next 23 dc, fpdc in fpdc; (dc in next 24 dc, fpdc in fpdc) around, sl st in top of ch3 (288dc + 12fpdc = 300sts)

You'll have a nice big weird ribbed disc now, but we're not done yet!

R26: ch3, insert hook through back loops of next dc - by this I mean the back loop usually used and there should be a very small wrapped section just below that loop that you can wiggle the hook onto. If you cannot find that, don't worry, just work in back loops only to the end of the round, otherwise, dc into both loops around, change to your second color in the end of the last dc, sl st in top of ch3 to join. (300 sts)

R27: ch3, dc in next 74 dc, hdc in next dc, sc in next dc, sl st in next 146 dc, sc in next dc, hdc in next dc, dc in last 75 dc, sl st to top of ch 3 to join. (150 dc, 2 hdc, 2sc, 146 sl st = 300 sts)

R28: ch3, dc in next 74 dc, foundation dc 150 stitches, skip the sc, hdc, and sl st, dc in next 75 dc, sl st in top of ch 3 to join. (300 dc)

R29-32: ch2, hdc around, sl st in top of ch2 to join. (300 hdc)

After this row, work in a spiral without joining

R33-47: sc around (300 sc)

At any point in these single crochet rounds, you should start to sew in your zipper!

R48: [sc2tog, sc in next 23 sc] around (288 sc)

R49-60: sc around (288 sc)

R61: [sc in next 11 sc, sc2tog, sc in next 11sc] around (276 sc)

R62-73: sc around (276 sc)

R74: [sc2tog, sc in next 21 sc] around (264 sc)

R75-80: sc around (264 sc)

R81: [sc in next 10 sc, sc2tog, sc in next 10 sc] around (252 sc)

R82-87: sc around (252 sc)

R88: [sc2tog, sc in next 19 sc] (240 sc)

R89-94: sc around (240 sc)

R95: [sc in next 9 sc, sc2tog, sc in next 9 sc] around (228 sc)

R96-98: sc around (228 sc)

R99: [sc2tog, sc in next 17 sc] around (216 sc)

R100-102: sc around (216 sc)

R103: [sc in next 8 sc, sc2tog, sc in next 8 sc] (204 sc)

R104-106: sc around (204 sc)

R107: [sc2tog, sc in next 15 sc] around (192 sc)

R108-110: sc around (192 sc)

R111: [sc in next 7 sc, sc2tog, sc in next 7 sc] (180 sc)

R112: sc around (180 sc)

R113: [sc2tog, sc in next 13 sc] around (168 sc)

R114: sc around (168 sc)

R115: [sc in next 6 sc, sc2tog, sc in next 6 sc] around (156 sc)

R116: sc around (156 sc)

R117: [sc2tog, sc in next 11 sc] around (144 sc)

R118: sc around (144 sc)

R119: [sc in next 5 sc, sc2tog, sc in next 5 sc] around (132 sc)

R120: sc around (132 sc)

R121: [sc2tog, sc in next 9 sc] around (120 sc)

This Week:

R122: [sc in next 4 sc, sc2tog, sc in next 4 sc] around (108 sc)

R123: [sc2tog, sc in next 7 sc] around (96 sc)

R124: [sc in next 3 sc, sc2tog, sc in next 3 sc] around (84 sc)

R125: [sc2tog, sc in next 5 sc] around (72 sc)

R126: [sc in next 2 sc, sc2tog, sc in next 2 sc] around (60 sc)

R127: [sc2tog, sc in next 3 sc] around (48 sc)

R128: [sc in next sc, sc2tog, sc in next sc] around (36 sc)

R129: [sc2tog, sc in next sc] around (24 sc)

R130: sc2tog around (12 sc)

Next Steps:

Washing!

Closure/Stabilization

Decoration

Straps (patterned?!)

Surprise! It's a mushroom purse!

We're leaving the 12 stitch hole open for now.

Let's knot the thread, clip it (leave a tail for sewing!), and we'll start up next week on some finishing touches!

I... will have to look up inspiration/ideas on how to finish this project, but I have some solid ideas!

Please use this very amateurish pattern as a jumping off point for making your own projects! Experiment with different reductions on the cap, different colors, different yarn or thread weights! I wouldn't recommend too fine a thread, since it wouldn't hold up well to overwear, but if you're using a bigger yarn, remember that using a smaller hook than the yarn maker recommends will make your project stiffer naturally, meaning you have to use less starch or other stiffening agents later!

As for me, I'm going to wind down with a cup of decaf mocha and some internet videos! Check back in tomorrow when I do a Talk About Tuesday.

And as always,

Go Enjoy Something!

FC

Fiber Monday

More Secret Project Progress!

 

Goodness me, it's a gorgeous, glorious, fantabulous day, and I'm so glad I got to spend some of my time outside! It was sunny with a very light breeze and the birds were happily frolicking in the field as my mother trimmed back invasive multiflora rose vines. At about 60℉/15,5℃, it was just the perfect day to go outside and sketch. It was also the perfect day for carpenter bees to be intrigued by my sketchpad.

I didn't stay out as long as I'd have liked lol.

I did, however, get a bunch done on the Secret Project this week! It may not be a huge amount, but we'll absolutely be done with the red thread next week. Thank goodness!

The Project Thus Far:

Round 1: sc 6 into magic ring (6 sc)

R2: 2sc around (12 sc)

R3: [2sc, sc] around (18 sc)

R4: [sc, 2sc, sc] (24 sc)

R5: [2sc, sc in next 3 sts] (30 sc)

R6: sc around (30 sc)

R7: [sc in next 2 sts, 2sc, sc in next 2 sts] around (36 sc)

R8: [2sc, sc in next 5 sts] around (42 sc)

R9: [sc in next 3 sts, 2sc, sc in next 3 sts] around (48 sc)

R10: [2sc, sc in next 7 sts] around (54 sts)

R11: [sc in next 4 sts, 2sc, sc in next 4 sts] around (60 sc)

R12-13: sc around (60 sc)

R14: [2sc, sc in next 9 sts] around (66 sc)

R15: [sc in next 5 sts, 2sc, sc in next 5 sts] around (72 sc)

R16: [2sc, sc in next 11 sts] around (78 sc)

R17: [sc in next 6 sts, 2sc, sc in next 6 sts] around (84 sc)

R18: [2sc, sc in next 13 sts] around (90 sc)

R19-21: sc around (90 sc)

R22: [sc in next 7 sts, 2sc, sc in next 7 sts] around (96 sc)

R23: [2sc, sc in next 15 sts] around (102 sc)

R24: [sc in next 8 sts, 2sc, sc in next 8 sts] around (108 sc)

R25: [2sc, sc in next 17 sts] around (114 sc)

R26: [sc in next 9 sts, 2sc, sc in next 9 sts] around (120 sc)

R27-30: sc around (120 sc)

R31: [2sc, sc in next 19 sts] around (126 sc)

R32: [sc in next 10 sts, 2sc, sc in next 10 sts] around (132 sc)

R33: [2sc, sc in next 21 sts] around (138 sc)

R34: [sc in next 11 sts, 2sc, sc in next 11 sts] around (144 sc)

R35: [2sc, sc in next 23 sts] around (150 sc)

R36-40: sc around (150 sc)

R41: [sc 2 together, sc 23] around (144 sc)

R42-47: sc around (144 sc)

R48: [sc 11, sc 2 together, sc 11] around (138 sc)

R49-55: sc around (138 sc)

R56: [sc 2 together, sc 21] around (132 sc)

R57-64: sc around (132sc)

R65: [sc 10, sc 2 tog, sc 10] around (126 sc)

R66-74: sc around (126 sc)

R75: [sc 2 tog, sc 19] around (120 sc)

R76-84: sc around (120 sc)

R85: sc around, sl st to first sc (120 sc)

R86: ch3 (counts as 1st dc), dc in each sc around, sl st in top of ch3 (120 sc)

R87: ch3 (counts as 1st dc), dc in next 10 dc; yarn over, insert hook into next dc, pull through 1 loop, yarn over, pull through 2 loops, yarn over, pull through 2 loops (does not count as 1st foundation dc), foundation dc next 96 stitches, then (being careful not to twist) dc in the 12th dc from the end of the round, dc to the end of the round (24 dc, 96 foundation dc = 120 dc); sl st to top of ch3, fasten off.

You should now have something that looks like a hinged ring or a handle attached to an odd, pear-shaped pouch. Now we’ll begin the underside of the lid (this is going to be weird, I’m sorry).

Form a magic ring from the same color as you’ve been using. I use a double-magic-ring for added security but you can start this in the round however you like.

R1: ch3 (counts as 1st dc here and throughout), dc 11 in ring, sl st to the top of the ch3 (12dc)

R2: ch3, fpdc in same dc, (dc in next dc, fpdc in same dc) around, sl st to top of ch3 (12dc, 12fpdc = 24st)

R3: ch3, dc in next st, fpdc in fpdc (dc in next 2 st, fpdc in fpdc) around, sl st to top of ch3 (24dc, 12fpdc = 36st)

R4: ch3, dc in next 2 sts, fpdc in fpdc (dc in next 3 sts, fpdc in fpdc) around, sl st to top of ch3 (36dc, 12fpdc = 48st)

R5: ch3, dc in next 3 sts, fpdc in fpdc (dc in next 4 sts, fpdc in fpdc) around, sl st to top of ch3 (48dc, 12fpdc = 60st)

R6: ch3, dc in next 4 sts, fpdc in fpdc (dc in next 5 sts, fpdc in fpdc) around, sl st to top of ch3 (60dc, 12fpdc = 72st)

R7: ch3, dc in next 5 sts, fpdc in fpdc (dc in next 6 sts, fpdc in fpdc) around, sl st to top of ch3 (72dc, 12fpdc = 84st)

R8: ch3, dc in next 6 sts, fpdc in fpdc (dc in next 7 sts, fpdc in fpdc) around, sl st to top of ch3 (84dc, 12fpdc = 96st)

R9: ch3, dc in next 7 sts, fpdc in fpdc (dc in next 8 sts, fpdc in fpdc) around, sl st to top of ch3 (96dc, 12fpdc = 108st)

R10: ch3, dc in next 8 sts, fpdc in fpdc (dc in next 9 sts, fpdc in fpdc) around, sl st to top of ch3 (108dc, 12fpdc = 120st)

Take your hook out of the disc you formed (which we will now refer to as the “Lid”), then choose a spot to attach it to on the weird flap/hinge part of the first piece (which we’ll now refer to as the “Body”). With the ridged pattern facing downward (towards the open mouth of the Body), insert your hook back through one stitch of the Body’s hinge/flap and back into the loop of the Lid. We will be making our stitches through the hinge/flap stitches and back into the Lid for this round.

R11: ch3 (pull the first loop all the way through the hinge/flap stitch to make your 1st ch), dc in next 9 dc going through the corresponding flap/hinge stitches as you go; on the next stitch, do not go back through the hinge/flap stitch to make your fpdc in fpdc; (dc in next 10 dc, fpdc in fpdc) around until the last fpdc, which is basically impossible (if you figure it out, great!) so just fake it til you make it; sl st in top of ch3. (120dc + 12fpdc = 132 sts)

You should have something that looks a bit like a sand dollar stuck in a ring.

R12: ch3, dc in next 10 dc, fpdc in fpdc; (dc in next 11 dc, fpdc in fpdc) around, sl st in top of ch3 (132dc + 12fpdc = 144 sts)

R13: ch3, dc in next 11 dc, fpdc in fpdc; (dc in next 12 dc, fpdc in fpdc) around, sl st in top of ch3 (144dc + 12fpdc = 156 sts)

R14: ch3, dc in next 12 dc, fpdc in fpdc; (dc in next 13 dc, fpdc in fpdc) around, sl st in top of ch3 (156dc + 12fpdc = 168sts)

R15: ch3, dc in next 13 dc, fpdc in fpdc; (dc in next 14 dc, fpdc in fpdc) around, sl st in top of ch3 (168dc + 12fpdc = 180sts)

R16: ch3, dc in next 14 dc, fpdc in fpdc; (dc in next 15 dc, fpdc in fpdc) around, sl st in top of ch3 (180dc + 12fpdc = 192sts)

R17: ch3, dc in next 15 dc, fpdc in fpdc; (dc in next 16 dc, fpdc in fpdc) around, sl st in top of ch3 (192dc + 12fpdc = 204sts)

R18: ch3, dc in next 16 dc, fpdc in fpdc; (dc in next 17 dc, fpdc in fpdc) around, sl st in top of ch3 (204dc + 12fpdc = 216sts)

R19: ch3, dc in next 17 dc, fpdc in fpdc; (dc in next 18 dc, fpdc in fpdc) around, sl st in top of ch3 (216dc + 12fpdc = 228sts)

R20: ch3, dc in next 18 dc, fpdc in fpdc; (dc in next 19 dc, fpdc in fpdc) around, sl st in top of ch3 (228dc + 12fpdc = 240sts)

R21: ch3, dc in next 19 dc, fpdc in fpdc; (dc in next 20 dc, fpdc in fpdc) around, sl st in top of ch3 (240dc + 12fpdc = 252sts)

R22: ch3, dc in next 20 dc, fpdc in fpdc; (dc in next 21 dc, fpdc in fpdc) around, sl st in top of ch3 (252dc + 12fpdc = 264sts)

R23: ch3, dc in next 21 dc, fpdc in fpdc; (dc in next 22 dc, fpdc in fpdc) around, sl st in top of ch3 (264dc + 12fpdc = 276sts)

R24: ch3, dc in next 22 dc, fpdc in fpdc; (dc in next 23 dc, fpdc in fpdc) around, sl st in top of ch3 (276dc + 12fpdc = 288sts)

R25: ch3, dc in next 23 dc, fpdc in fpdc; (dc in next 24 dc, fpdc in fpdc) around, sl st in top of ch3 (288dc + 12fpdc = 300sts)

You'll have a nice big weird ribbed disc now, but we're not done yet!

R26: ch3, insert hook through back loops of next dc - by this I mean the back loop usually used and there should be a very small wrapped section just below that loop that you can wiggle the hook onto. If you cannot find that, don't worry, just work in back loops only to the end of the round, otherwise, dc into both loops around, change to your second color in the end of the last dc, sl st in top of ch3 to join. (300 sts)

R27: ch3, dc in next 74 dc, hdc in next dc, sc in next dc, sl st in next 146 dc, sc in next dc, hdc in next dc, dc in last 75 dc, sl st to top of ch 3 to join. (150 dc, 2 hdc, 2sc, 146 sl st = 300 sts)

R28: ch3, dc in next 74 dc, foundation dc 150 stitches, skip the sc, hdc, and sl st, dc in next 75 dc, sl st in top of ch 3 to join. (300 dc)

R29-32: ch2, hdc around, sl st in top of ch2 to join. (300 hdc)

After this row, work in a spiral without joining

R33-47: sc around (300 sc)

At any point in these single crochet rounds, you should start to sew in your zipper!

R48: [sc2tog, sc in next 23 sc] around (288 sc)

R49-60: sc around (288 sc)

R61: [sc in next 11 sc, sc2tog, sc in next 11sc] around (276 sc)

R62-73: sc around (276 sc)

R74: [sc2tog, sc in next 21 sc] around (264 sc)

R75-80: sc around (264 sc)

R81: [sc in next 10 sc, sc2tog, sc in next 10 sc] around (252 sc)

R82-87: sc around (252 sc)

R88: [sc2tog, sc in next 19 sc] (240 sc)

R89-94: sc around (240 sc)

R95: [sc in next 9 sc, sc2tog, sc in next 9 sc] around (228 sc)

R96-98: sc around (228 sc)

R99: [sc2tog, sc in next 17 sc] around (216 sc)

R100-102: sc around (216 sc)

R103: [sc in next 8 sc, sc2tog, sc in next 8 sc] (204 sc)

R104-106: sc around (204 sc)

R107: [sc2tog, sc in next 15 sc] around (192 sc)

R108-110: sc around (192 sc)

R111: [sc in next 7 sc, sc2tog, sc in next 7 sc] (180 sc)

R112: sc around (180 sc)

This Week

R113: [sc2tog, sc in next 13 sc] around (168 sc)

R114: sc around (168 sc)

R115: [sc in next 6 sc, sc2tog, sc in next 6 sc] around (156 sc)

R116: sc around (156 sc)

R117: [sc2tog, sc in next 11 sc] around (144 sc)

R118: sc around (144 sc)

R119: [sc in next 5 sc, sc2tog, sc in next 5 sc] around (132 sc)

R120: sc around (132 sc)

R121: [sc2tog, sc in next 9 sc] (120 sc)

As you can see, we're running out of red thread again :|

I am so thrilled that we're nearly done with this part of the project - we've reached the home stretch on the red thread - closing in the top! Once that's finished, it's just closures, decorations, and some straps and we'll be done! I can't wait to finish this!

And I have several other projects I'm working on right now, too, including a 90x90 block filet crochet panel, a blue-toned plush, and two tricolored vest projects that may or may not work out.

I'll talk more about the fine weather and fun art tomorrow. For now, I'm going to listen to the peeper frogs chirping along in the small ponds near me, the ducks and chickens next door bedding down for the night, and a bunch of Youtube vids to watch.

Go Enjoy Something!

FC

Fiber Monday

Progress Continues!

I did some more work on the Secret Project/Mystery Project this week, and I'm pleased to announce we have left the realm of Multiple Single Crochet Rounds! After this week, we'll be reducing, making One (1) round of single crochet, and repeating that pattern for a bit. You'll see next week.

Here's what we've got so far:

Round 1: sc 6 into magic ring (6 sc)

R2: 2sc around (12 sc)

R3: [2sc, sc] around (18 sc)

R4: [sc, 2sc, sc] (24 sc)

R5: [2sc, sc in next 3 sts] (30 sc)

R6: sc around (30 sc)

R7: [sc in next 2 sts, 2sc, sc in next 2 sts] around (36 sc)

R8: [2sc, sc in next 5 sts] around (42 sc)

R9: [sc in next 3 sts, 2sc, sc in next 3 sts] around (48 sc)

R10: [2sc, sc in next 7 sts] around (54 sts)

R11: [sc in next 4 sts, 2sc, sc in next 4 sts] around (60 sc)

R12-13: sc around (60 sc)

R14: [2sc, sc in next 9 sts] around (66 sc)

R15: [sc in next 5 sts, 2sc, sc in next 5 sts] around (72 sc)

R16: [2sc, sc in next 11 sts] around (78 sc)

R17: [sc in next 6 sts, 2sc, sc in next 6 sts] around (84 sc)

R18: [2sc, sc in next 13 sts] around (90 sc)

R19-21: sc around (90 sc)

R22: [sc in next 7 sts, 2sc, sc in next 7 sts] around (96 sc)

R23: [2sc, sc in next 15 sts] around (102 sc)

R24: [sc in next 8 sts, 2sc, sc in next 8 sts] around (108 sc)

R25: [2sc, sc in next 17 sts] around (114 sc)

R26: [sc in next 9 sts, 2sc, sc in next 9 sts] around (120 sc)

R27-30: sc around (120 sc)

R31: [2sc, sc in next 19 sts] around (126 sc)

R32: [sc in next 10 sts, 2sc, sc in next 10 sts] around (132 sc)

R33: [2sc, sc in next 21 sts] around (138 sc)

R34: [sc in next 11 sts, 2sc, sc in next 11 sts] around (144 sc)

R35: [2sc, sc in next 23 sts] around (150 sc)

R36-40: sc around (150 sc)

R41: [sc 2 together, sc 23] around (144 sc)

R42-47: sc around (144 sc)

R48: [sc 11, sc 2 together, sc 11] around (138 sc)

R49-55: sc around (138 sc)

R56: [sc 2 together, sc 21] around (132 sc)

R57-64: sc around (132sc)

R65: [sc 10, sc 2 tog, sc 10] around (126 sc)

R66-74: sc around (126 sc)

R75: [sc 2 tog, sc 19] around (120 sc)

R76-84: sc around (120 sc)

R85: sc around, sl st to first sc (120 sc)

R86: ch3 (counts as 1st dc), dc in each sc around, sl st in top of ch3 (120 sc)

R87: ch3 (counts as 1st dc), dc in next 10 dc; yarn over, insert hook into next dc, pull through 1 loop, yarn over, pull through 2 loops, yarn over, pull through 2 loops (does not count as 1st foundation dc), foundation dc next 96 stitches, then (being careful not to twist) dc in the 12th dc from the end of the round, dc to the end of the round (24 dc, 96 foundation dc = 120 dc); sl st to top of ch3, fasten off.

You should now have something that looks like a hinged ring or a handle attached to an odd, pear-shaped pouch. Now we’ll begin the underside of the lid (this is going to be weird, I’m sorry).

Form a magic ring from the same color as you’ve been using. I use a double-magic-ring for added security but you can start this in the round however you like.

R1: ch3 (counts as 1st dc here and throughout), dc 11 in ring, sl st to the top of the ch3 (12dc)

R2: ch3, fpdc in same dc, (dc in next dc, fpdc in same dc) around, sl st to top of ch3 (12dc, 12fpdc = 24st)

R3: ch3, dc in next st, fpdc in fpdc (dc in next 2 st, fpdc in fpdc) around, sl st to top of ch3 (24dc, 

2fpdc = 36st)

R4: ch3, dc in next 2 sts, fpdc in fpdc (dc in next 3 sts, fpdc in fpdc) around, sl st to top of ch3 (36dc, 

2fpdc = 48st)

R5: ch3, dc in next 3 sts, fpdc in fpdc (dc in next 4 sts, fpdc in fpdc) around, sl st to top of ch3 (48dc, 12fpdc = 60st)

R6: ch3, dc in next 4 sts, fpdc in fpdc (dc in next 5 sts, fpdc in fpdc) around, sl st to top of ch3 (60dc, 

2fpdc = 72st)

R7: ch3, dc in next 5 sts, fpdc in fpdc (dc in next 6 sts, fpdc in fpdc) around, sl st to top of ch3 (72dc,  2fpdc = 84st)

R8: ch3, dc in next 6 sts, fpdc in fpdc (dc in next 7 sts, fpdc in fpdc) around, sl st to top of ch3 (84dc, 12fpdc = 96st)

R9: ch3, dc in next 7 sts, fpdc in fpdc (dc in next 8 sts, fpdc in fpdc) around, sl st to top of ch3 (96dc, 12fpdc = 108st)

R10: ch3, dc in next 8 sts, fpdc in fpdc (dc in next 9 sts, fpdc in fpdc) around, sl st to top of ch3 (108dc, 12fpdc = 120st)

Take your hook out of the disc you formed (which we will now refer to as the “Lid”), then choose a spot to attach it to on the weird flap/hinge part of the first piece (which we’ll now refer to as the “Body”). With the ridged pattern facing downward (towards the open mouth of the Body), insert your hook back through one stitch of the Body’s hinge/flap and back into the loop of the Lid. We will be making our stitches through the hinge/flap stitches and back into the Lid for this round.

R11: ch3 (pull the first loop all the way through the hinge/flap stitch to make your 1st ch), dc in next 9 dc going through the corresponding flap/hinge stitches as you go; on the next stitch, do not go back through the hinge/flap stitch to make your fpdc in fpdc; (dc in next 10 dc, fpdc in fpdc) around until the last fpdc, which is basically impossible (if you figure it out, great!) so just fake it til you make it; sl st in top of ch3. (120dc + 12fpdc = 132 sts)

You should have something that looks a bit like a sand dollar stuck in a ring.

R12: ch3, dc in next 10 dc, fpdc in fpdc; (dc in next 11 dc, fpdc in fpdc) around, sl st in top of ch3 (132dc + 12fpdc = 144 sts)

R13: ch3, dc in next 11 dc, fpdc in fpdc; (dc in next 12 dc, fpdc in fpdc) around, sl st in top of ch3 (144dc + 12fpdc = 156 sts)

R14: ch3, dc in next 12 dc, fpdc in fpdc; (dc in next 13 dc, fpdc in fpdc) around, sl st in top of ch3 (156dc + 12fpdc = 168sts)

R15: ch3, dc in next 13 dc, fpdc in fpdc; (dc in next 14 dc, fpdc in fpdc) around, sl st in top of ch3 (168dc + 12fpdc = 180sts)

R16: ch3, dc in next 14 dc, fpdc in fpdc; (dc in next 15 dc, fpdc in fpdc) around, sl st in top of ch3 (180dc + 12fpdc = 192sts)

R17: ch3, dc in next 15 dc, fpdc in fpdc; (dc in next 16 dc, fpdc in fpdc) around, sl st in top of ch3 (192dc + 12fpdc = 204sts)

R18: ch3, dc in next 16 dc, fpdc in fpdc; (dc in next 17 dc, fpdc in fpdc) around, sl st in top of ch3 (204dc + 12fpdc = 216sts)

R19: ch3, dc in next 17 dc, fpdc in fpdc; (dc in next 18 dc, fpdc in fpdc) around, sl st in top of ch3 (216dc + 12fpdc = 228sts)

R20: ch3, dc in next 18 dc, fpdc in fpdc; (dc in next 19 dc, fpdc in fpdc) around, sl st in top of ch3 (228dc + 12fpdc = 240sts)

R21: ch3, dc in next 19 dc, fpdc in fpdc; (dc in next 20 dc, fpdc in fpdc) around, sl st in top of ch3 (240dc + 12fpdc = 252sts)

R22: ch3, dc in next 20 dc, fpdc in fpdc; (dc in next 21 dc, fpdc in fpdc) around, sl st in top of ch3 (252dc + 12fpdc = 264sts)

R23: ch3, dc in next 21 dc, fpdc in fpdc; (dc in next 22 dc, fpdc in fpdc) around, sl st in top of ch3 (264dc + 12fpdc = 276sts)

R24: ch3, dc in next 22 dc, fpdc in fpdc; (dc in next 23 dc, fpdc in fpdc) around, sl st in top of ch3 (276dc + 12fpdc = 288sts)

R25: ch3, dc in next 23 dc, fpdc in fpdc; (dc in next 24 dc, fpdc in fpdc) around, sl st in top of ch3 (288dc + 12fpdc = 300sts)

You'll have a nice big weird ribbed disc now, but we're not done yet!

R26: ch3, insert hook through back loops of next dc - by this I mean the back loop usually used and there should be a very small wrapped section just below that loop that you can wiggle the hook onto. If you cannot find that, don't worry, just work in back loops only to the end of the round, otherwise, dc into both loops around, change to your second color in the end of the last dc, sl st in top of ch3 to join. (300 sts)

R27: ch3, dc in next 74 dc, hdc in next dc, sc in next dc, sl st in next 146 dc, sc in next dc, hdc in next dc, dc in last 75 dc, sl st to top of ch 3 to join. (150 dc, 2 hdc, 2sc, 146 sl st = 300 sts)

R28: ch3, dc in next 74 dc, foundation dc 150 stitches, skip the sc, hdc, and sl st, dc in next 75 dc, sl st in top of ch 3 to join. (300 dc)

R29-32: ch2, hdc around, sl st in top of ch2 to join. (300 hdc)

After this row, work in a spiral without joining

R33-47: sc around (300 sc)

At any point in these single crochet rounds, you should start to sew in your zipper!

R48: [sc2tog, sc in next 23 sc] around (288 sc)

R49-60: sc around (288 sc)

R61: [sc in next 11 sc, sc2tog, sc in next 11sc] around (276 sc)

R62-73: sc around (276 sc)

R74: [sc2tog, sc in next 21 sc] around (264 sc)

R75-80: sc around (264 sc)

R81: [sc in next 10 sc, sc2tog, sc in next 10 sc] around (252 sc)

R82-87: sc around (252 sc)

R88: [sc2tog, sc in next 19 sc] (240 sc)

R89-94: sc around (240 sc)

R95: [sc in next 9 sc, sc2tog, sc in next 9 sc] around (228 sc)

R96-98: sc around (228 sc)

R99: [sc2tog, sc in next 17 sc] around (216 sc)

R100-102: sc around (216 sc)

This Week:

R103: [sc in next 8 sc, sc2tog, sc in next 8 sc] (204 sc)

R104-106: sc around (204 sc)

R107: [sc2tog, sc in next 15 sc] around (192 sc)

R108-110: sc around (192 sc)

R111: [sc in next 7 sc, sc2tog, sc in next 7 sc] (180 sc)

R112: sc around (180 sc)

We're getting so close! SO FREAKIN CLOSE!!!

I have to admit, I'm gonna be so stoked when this project is done lol. I have an idea of what to do to stabilize things (spoilers: it involves wire, single crochet, and sewing...) but we'll have to wait and see if that works.

Also, I'm... running out of red thread from the first new spool. Already.

This project is apparently quite the yarn-eater!

Getting so excited to finish!

Hope all of your projects are going well, too, but this'll do it from me - kinda tired from all the hooking today :P

Go Enjoy Something!

FC

Fiber Monday

 

In Which I Did More Secret Mystery Project!

This week I did a little more on the Mystery Project, and I also started writing out the rest of the pattern for the Red Section (which we're still on currently lol). I have been using one of the Stitch Counters I got from my great aunt to keep track of how many rounds I've done, and that has helped immensely!

Here's the pattern so far:

Round 1: sc 6 into magic ring (6 sc)

R2: 2sc around (12 sc)

R3: [2sc, sc] around (18 sc)

R4: [sc, 2sc, sc] (24 sc)

R5: [2sc, sc in next 3 sts] (30 sc)

R6: sc around (30 sc)

R7: [sc in next 2 sts, 2sc, sc in next 2 sts] around (36 sc)

R8: [2sc, sc in next 5 sts] around (42 sc)

R9: [sc in next 3 sts, 2sc, sc in next 3 sts] around (48 sc)

R10: [2sc, sc in next 7 sts] around (54 sts)

R11: [sc in next 4 sts, 2sc, sc in next 4 sts] around (60 sc)

R12-13: sc around (60 sc)

R14: [2sc, sc in next 9 sts] around (66 sc)

R15: [sc in next 5 sts, 2sc, sc in next 5 sts] around (72 sc)

R16: [2sc, sc in next 11 sts] around (78 sc)

R17: [sc in next 6 sts, 2sc, sc in next 6 sts] around (84 sc)

R18: [2sc, sc in next 13 sts] around (90 sc)

R19-21: sc around (90 sc)

R22: [sc in next 7 sts, 2sc, sc in next 7 sts] around (96 sc)

R23: [2sc, sc in next 15 sts] around (102 sc)

R24: [sc in next 8 sts, 2sc, sc in next 8 sts] around (108 sc)

R25: [2sc, sc in next 17 sts] around (114 sc)

R26: [sc in next 9 sts, 2sc, sc in next 9 sts] around (120 sc)

R27-30: sc around (120 sc)

R31: [2sc, sc in next 19 sts] around (126 sc)

R32: [sc in next 10 sts, 2sc, sc in next 10 sts] around (132 sc)

R33: [2sc, sc in next 21 sts] around (138 sc)

R34: [sc in next 11 sts, 2sc, sc in next 11 sts] around (144 sc)

R35: [2sc, sc in next 23 sts] around (150 sc)

R36-40: sc around (150 sc)

R41: [sc 2 together, sc 23] around (144 sc)

R42-47: sc around (144 sc)

R48: [sc 11, sc 2 together, sc 11] around (138 sc)

R49-55: sc around (138 sc)

R56: [sc 2 together, sc 21] around (132 sc)

R57-64: sc around (132sc)

R65: [sc 10, sc 2 tog, sc 10] around (126 sc)

R66-74: sc around (126 sc)

R75: [sc 2 tog, sc 19] around (120 sc)

R76-84: sc around (120 sc)

R85: sc around, sl st to first sc (120 sc)

R86: ch3 (counts as 1st dc), dc in each sc around, sl st in top of ch3 (120 sc)

R87: ch3 (counts as 1st dc), dc in next 10 dc; yarn over, insert hook into next dc, pull through 1 loop, yarn over, pull through 2 loops, yarn over, pull through 2 loops (does not count as 1st foundation dc), foundation dc next 96 stitches, then (being careful not to twist) dc in the 12th dc from the end of the round, dc to the end of the round (24 dc, 96 foundation dc = 120 dc); sl st to top of ch3, fasten off.

You should now have something that looks like a hinged ring or a handle attached to an odd, pear-shaped pouch. Now we’ll begin the underside of the lid (this is going to be weird, I’m sorry).

Form a magic ring from the same color as you’ve been using. I use a double-magic-ring for added security but you can start this in the round however you like.

R1: ch3 (counts as 1st dc here and throughout), dc 11 in ring, sl st to the top of the ch3 (12dc)

R2: ch3, fpdc in same dc, (dc in next dc, fpdc in same dc) around, sl st to top of ch3 (12dc, 12fpdc = 24st)

R3: ch3, dc in next st, fpdc in fpdc (dc in next 2 st, fpdc in fpdc) around, sl st to top of ch3 (24dc, 12fpdc = 36st)

R4: ch3, dc in next 2 sts, fpdc in fpdc (dc in next 3 sts, fpdc in fpdc) around, sl st to top of ch3 (36dc, 12fpdc = 48st)

R5: ch3, dc in next 3 sts, fpdc in fpdc (dc in next 4 sts, fpdc in fpdc) around, sl st to top of ch3 (48dc, 12fpdc = 60st)

R6: ch3, dc in next 4 sts, fpdc in fpdc (dc in next 5 sts, fpdc in fpdc) around, sl st to top of ch3 (60dc, 12fpdc = 72st)

R7: ch3, dc in next 5 sts, fpdc in fpdc (dc in next 6 sts, fpdc in fpdc) around, sl st to top of ch3 (72dc, 12fpdc = 84st)

R8: ch3, dc in next 6 sts, fpdc in fpdc (dc in next 7 sts, fpdc in fpdc) around, sl st to top of ch3 (84dc, 12fpdc = 96st)

R9: ch3, dc in next 7 sts, fpdc in fpdc (dc in next 8 sts, fpdc in fpdc) around, sl st to top of ch3 (96dc, 12fpdc = 108st)

R10: ch3, dc in next 8 sts, fpdc in fpdc (dc in next 9 sts, fpdc in fpdc) around, sl st to top of ch3 (108dc, 12fpdc = 120st)

Take your hook out of the disc you formed (which we will now refer to as the “Lid”), then choose a spot to attach it to on the weird flap/hinge part of the first piece (which we’ll now refer to as the “Body”). With the ridged pattern facing downward (towards the open mouth of the Body), insert your hook back through one stitch of the Body’s hinge/flap and back into the loop of the Lid. We will be making our stitches through the hinge/flap stitches and back into the Lid for this round.

R11: ch3 (pull the first loop all the way through the hinge/flap stitch to make your 1st ch), dc in next 9 dc going through the corresponding flap/hinge stitches as you go; on the next stitch, do not go back through the hinge/flap stitch to make your fpdc in fpdc; (dc in next 10 dc, fpdc in fpdc) around until the last fpdc, which is basically impossible (if you figure it out, great!) so just fake it til you make it; sl st in top of ch3. (120dc + 12fpdc = 132 sts)

You should have something that looks a bit like a sand dollar stuck in a ring.

R12: ch3, dc in next 10 dc, fpdc in fpdc; (dc in next 11 dc, fpdc in fpdc) around, sl st in top of ch3 (132dc + 12fpdc = 144 sts)

R13: ch3, dc in next 11 dc, fpdc in fpdc; (dc in next 12 dc, fpdc in fpdc) around, sl st in top of ch3 (144dc + 12fpdc = 156 sts)

R14: ch3, dc in next 12 dc, fpdc in fpdc; (dc in next 13 dc, fpdc in fpdc) around, sl st in top of ch3 (156dc + 12fpdc = 168sts)

R15: ch3, dc in next 13 dc, fpdc in fpdc; (dc in next 14 dc, fpdc in fpdc) around, sl st in top of ch3 (168dc + 12fpdc = 180sts)

R16: ch3, dc in next 14 dc, fpdc in fpdc; (dc in next 15 dc, fpdc in fpdc) around, sl st in top of ch3 (180dc + 12fpdc = 192sts)

R17: ch3, dc in next 15 dc, fpdc in fpdc; (dc in next 16 dc, fpdc in fpdc) around, sl st in top of ch3 (192dc + 12fpdc = 204sts)

R18: ch3, dc in next 16 dc, fpdc in fpdc; (dc in next 17 dc, fpdc in fpdc) around, sl st in top of ch3 (204dc + 12fpdc = 216sts)

R19: ch3, dc in next 17 dc, fpdc in fpdc; (dc in next 18 dc, fpdc in fpdc) around, sl st in top of ch3 (216dc + 12fpdc = 228sts)

R20: ch3, dc in next 18 dc, fpdc in fpdc; (dc in next 19 dc, fpdc in fpdc) around, sl st in top of ch3 (228dc + 12fpdc = 240sts)

R21: ch3, dc in next 19 dc, fpdc in fpdc; (dc in next 20 dc, fpdc in fpdc) around, sl st in top of ch3 (240dc + 12fpdc = 252sts)

R22: ch3, dc in next 20 dc, fpdc in fpdc; (dc in next 21 dc, fpdc in fpdc) around, sl st in top of ch3 (252dc + 12fpdc = 264sts)

R23: ch3, dc in next 21 dc, fpdc in fpdc; (dc in next 22 dc, fpdc in fpdc) around, sl st in top of ch3 (264dc + 12fpdc = 276sts)

R24: ch3, dc in next 22 dc, fpdc in fpdc; (dc in next 23 dc, fpdc in fpdc) around, sl st in top of ch3 (276dc + 12fpdc = 288sts)

R25: ch3, dc in next 23 dc, fpdc in fpdc; (dc in next 24 dc, fpdc in fpdc) around, sl st in top of ch3 (288dc + 12fpdc = 300sts)

You'll have a nice big weird ribbed disc now, but we're not done yet!

R26: ch3, insert hook through back loops of next dc - by this I mean the back loop usually used and there should be a very small wrapped section just below that loop that you can wiggle the hook onto. If you cannot find that, don't worry, just work in back loops only to the end of the round, otherwise, dc into both loops around, change to your second color in the end of the last dc, sl st in top of ch3 to join. (300 sts)

R27: ch3, dc in next 74 dc, hdc in next dc, sc in next dc, sl st in next 146 dc, sc in next dc, hdc in next dc, dc in last 75 dc, sl st to top of ch 3 to join. (150 dc, 2 hdc, 2sc, 146 sl st = 300 sts)

R28: ch3, dc in next 74 dc, foundation dc 150 stitches, skip the sc, hdc, and sl st, dc in next 75 dc, sl st in top of ch 3 to join. (300 dc)

R29-32: ch2, hdc around, sl st in top of ch2 to join. (300 hdc)

After this row, work in a spiral without joining

R33-47: sc around (300 sc)

At any point in these single crochet rounds, you should start to sew in your zipper!

R48: [sc2tog, sc in next 23 sc] around (288 sc)

R49-60: sc around (288 sc)

R61: [sc in next 11 sc, sc2tog, sc in next 11sc] around (276 sc)

R62-73: sc around (276 sc)

R74: [sc2tog, sc in next 21 sc] around (264 sc)

R75-80: sc around (264 sc)

This week:

R81: [sc in next 10 sc, sc2tog, sc in next 10 sc] around (252 sc)

R82-87: sc around (252 sc)

R88: [sc2tog, sc in next 19 sc] (240 sc)

R89-94: sc around (240 sc)

Scissors and laptop cord for scale lol

As you can see, it's a big project. We'll be closing in the top soon, though, and then I'll show you how to finish the project with one more closure, a strap, and some embellishments!

That'll do it for my projects this week - I'm still working on some other stuff, but nothing's ready to share, yet!

How are all of your projects coming along?

Go Enjoy Something!

FC

Fiber Monday

 

In My Defense I Am Super Tired

My brain is operating at about... maybe 40% right now? I'm the happy-dopey kind of tired, but it was sufficiently muzzy that I had to frog about every 3rd row lol.

I did finish the previous section of the Mystery Project, but I had to stop about halfway through this week's section, so your mileage may vary lol.

THE PATTERN SO FAR:

Round 1: sc 6 into magic ring (6 sc)

R2: 2sc around (12 sc)

R3: [2sc, sc] around (18 sc)

R4: [sc, 2sc, sc] (24 sc)

R5: [2sc, sc in next 3 sts] (30 sc)

R6: sc around (30 sc)

R7: [sc in next 2 sts, 2sc, sc in next 2 sts] around (36 sc)

R8: [2sc, sc in next 5 sts] around (42 sc)

R9: [sc in next 3 sts, 2sc, sc in next 3 sts] around (48 sc)

R10: [2sc, sc in next 7 sts] around (54 sts)

R11: [sc in next 4 sts, 2sc, sc in next 4 sts] around (60 sc)

R12-13: sc around (60 sc)

R14: [2sc, sc in next 9 sts] around (66 sc)

R15: [sc in next 5 sts, 2sc, sc in next 5 sts] around (72 sc)

R16: [2sc, sc in next 11 sts] around (78 sc)

R17: [sc in next 6 sts, 2sc, sc in next 6 sts] around (84 sc)

R18: [2sc, sc in next 13 sts] around (90 sc)

R19-21: sc around (90 sc)

R22: [sc in next 7 sts, 2sc, sc in next 7 sts] around (96 sc)

R23: [2sc, sc in next 15 sts] around (102 sc)

R24: [sc in next 8 sts, 2sc, sc in next 8 sts] around (108 sc)

R25: [2sc, sc in next 17 sts] around (114 sc)

R26: [sc in next 9 sts, 2sc, sc in next 9 sts] around (120 sc)

R27-30: sc around (120 sc)

R31: [2sc, sc in next 19 sts] around (126 sc)

R32: [sc in next 10 sts, 2sc, sc in next 10 sts] around (132 sc)

R33: [2sc, sc in next 21 sts] around (138 sc)

R34: [sc in next 11 sts, 2sc, sc in next 11 sts] around (144 sc)

R35: [2sc, sc in next 23 sts] around (150 sc)

R36-40: sc around (150 sc)

R41: [sc 2 together, sc 23] around (144 sc)

R42-47: sc around (144 sc)

R48: [sc 11, sc 2 together, sc 11] around (138 sc)

R49-55: sc around (138 sc)

R56: [sc 2 together, sc 21] around (132 sc)

R57-64: sc around (132sc)

R65: [sc 10, sc 2 tog, sc 10] around (126 sc)

R66-74: sc around (126 sc)

R75: [sc 2 tog, sc 19] around (120 sc)

R76-84: sc around (120 sc)

R85: sc around, sl st to first sc (120 sc)

R86: ch3 (counts as 1st dc), dc in each sc around, sl st in top of ch3 (120 sc)

R87: ch3 (counts as 1st dc), dc in next 10 dc; yarn over, insert hook into next dc, pull through 1 loop, yarn over, pull through 2 loops, yarn over, pull through 2 loops (does not count as 1st foundation dc), foundation dc next 96 stitches, then (being careful not to twist) dc in the 12th dc from the end of the round, dc to the end of the round (24 dc, 96 foundation dc = 120 dc); sl st to top of ch3, fasten off.

You should now have something that looks like a hinged ring or a handle attached to an odd, pear-shaped pouch. Now we’ll begin the underside of the lid (this is going to be weird, I’m sorry).

Form a magic ring from the same color as you’ve been using. I use a double-magic-ring for added security but you can start this in the round however you like.

R1: ch3 (counts as 1st dc here and throughout), dc 11 in ring, sl st to the top of the ch3 (12dc)

R2: ch3, fpdc in same dc, (dc in next dc, fpdc in same dc) around, sl st to top of ch3 (12dc, 12fpdc = 24st)

R3: ch3, dc in next st, fpdc in fpdc (dc in next 2 st, fpdc in fpdc) around, sl st to top of ch3 (24dc, 12fpdc = 36st)

R4: ch3, dc in next 2 sts, fpdc in fpdc (dc in next 3 sts, fpdc in fpdc) around, sl st to top of ch3 (36dc, 12fpdc = 48st)

R5: ch3, dc in next 3 sts, fpdc in fpdc (dc in next 4 sts, fpdc in fpdc) around, sl st to top of ch3 (48dc, 12fpdc = 60st)

R6: ch3, dc in next 4 sts, fpdc in fpdc (dc in next 5 sts, fpdc in fpdc) around, sl st to top of ch3 (60dc, 12fpdc = 72st)

R7: ch3, dc in next 5 sts, fpdc in fpdc (dc in next 6 sts, fpdc in fpdc) around, sl st to top of ch3 (72dc, 12fpdc = 84st)

R8: ch3, dc in next 6 sts, fpdc in fpdc (dc in next 7 sts, fpdc in fpdc) around, sl st to top of ch3 (84dc, 12fpdc = 96st)

R9: ch3, dc in next 7 sts, fpdc in fpdc (dc in next 8 sts, fpdc in fpdc) around, sl st to top of ch3 (96dc, 12fpdc = 108st)

R10: ch3, dc in next 8 sts, fpdc in fpdc (dc in next 9 sts, fpdc in fpdc) around, sl st to top of ch3 (108dc, 12fpdc = 120st)

Take your hook out of the disc you formed (which we will now refer to as the “Lid”), then choose a spot to attach it to on the weird flap/hinge part of the first piece (which we’ll now refer to as the “Body”). With the ridged pattern facing downward (towards the open mouth of the Body), insert your hook back through one stitch of the Body’s hinge/flap and back into the loop of the Lid. We will be making our stitches through the hinge/flap stitches and back into the Lid for this round.

R11: ch3 (pull the first loop all the way through the hinge/flap stitch to make your 1st ch), dc in next 9 dc going through the corresponding flap/hinge stitches as you go; on the next stitch, do not go back through the hinge/flap stitch to make your fpdc in fpdc; (dc in next 10 dc, fpdc in fpdc) around until the last fpdc, which is basically impossible (if you figure it out, great!) so just fake it til you make it; sl st in top of ch3. (120dc + 12fpdc = 132 sts)

You should have something that looks a bit like a sand dollar stuck in a ring.

R12: ch3, dc in next 10 dc, fpdc in fpdc; (dc in next 11 dc, fpdc in fpdc) around, sl st in top of ch3 (132dc + 12fpdc = 144 sts)

R13: ch3, dc in next 11 dc, fpdc in fpdc; (dc in next 12 dc, fpdc in fpdc) around, sl st in top of ch3 (144dc + 12fpdc = 156 sts)

R14: ch3, dc in next 12 dc, fpdc in fpdc; (dc in next 13 dc, fpdc in fpdc) around, sl st in top of ch3 (156dc + 12fpdc = 168sts)

R15: ch3, dc in next 13 dc, fpdc in fpdc; (dc in next 14 dc, fpdc in fpdc) around, sl st in top of ch3 (168dc + 12fpdc = 180sts)

R16: ch3, dc in next 14 dc, fpdc in fpdc; (dc in next 15 dc, fpdc in fpdc) around, sl st in top of ch3 (180dc + 12fpdc = 192sts)

R17: ch3, dc in next 15 dc, fpdc in fpdc; (dc in next 16 dc, fpdc in fpdc) around, sl st in top of ch3 (192dc + 12fpdc = 204sts)

R18: ch3, dc in next 16 dc, fpdc in fpdc; (dc in next 17 dc, fpdc in fpdc) around, sl st in top of ch3 (204dc + 12fpdc = 216sts)

R19: ch3, dc in next 17 dc, fpdc in fpdc; (dc in next 18 dc, fpdc in fpdc) around, sl st in top of ch3 (216dc + 12fpdc = 228sts)

R20: ch3, dc in next 18 dc, fpdc in fpdc; (dc in next 19 dc, fpdc in fpdc) around, sl st in top of ch3 (228dc + 12fpdc = 240sts)

R21: ch3, dc in next 19 dc, fpdc in fpdc; (dc in next 20 dc, fpdc in fpdc) around, sl st in top of ch3 (240dc + 12fpdc = 252sts)

R22: ch3, dc in next 20 dc, fpdc in fpdc; (dc in next 21 dc, fpdc in fpdc) around, sl st in top of ch3 (252dc + 12fpdc = 264sts)

R23: ch3, dc in next 21 dc, fpdc in fpdc; (dc in next 22 dc, fpdc in fpdc) around, sl st in top of ch3 (264dc + 12fpdc = 276sts)

R24: ch3, dc in next 22 dc, fpdc in fpdc; (dc in next 23 dc, fpdc in fpdc) around, sl st in top of ch3 (276dc + 12fpdc = 288sts)

R25: ch3, dc in next 23 dc, fpdc in fpdc; (dc in next 24 dc, fpdc in fpdc) around, sl st in top of ch3 (288dc + 12fpdc = 300sts)

You'll have a nice big weird ribbed disc now, but we're not done yet!

R26: ch3, insert hook through back loops of next dc - by this I mean the back loop usually used and there should be a very small wrapped section just below that loop that you can wiggle the hook onto. If you cannot find that, don't worry, just work in back loops only to the end of the round, otherwise, dc into both loops around, change to your second color in the end of the last dc, sl st in top of ch3 to join. (300 sts)

R27: ch3, dc in next 74 dc, hdc in next dc, sc in next dc, sl st in next 146 dc, sc in next dc, hdc in next dc, dc in last 75 dc, sl st to top of ch 3 to join. (150 dc, 2 hdc, 2sc, 146 sl st = 300 sts)

R28: ch3, dc in next 74 dc, foundation dc 150 stitches, skip the sc, hdc, and sl st, dc in next 75 dc, sl st in top of ch 3 to join. (300 dc)

R29-32: ch2, hdc around, sl st in top of ch2 to join. (300 hdc)

After this row, work in a spiral without joining

R33-47: sc around (300 sc)

At any point in these single crochet rounds, you should start to sew in your zipper!

R48: [sc2tog, sc in next 23 sc] around (288 sc)

R49-60: sc around (288 sc)

R61: [sc in next 11 sc, sc2tog, sc in next 11sc] around (276 sc)

R62-73: sc around (276 sc)

THIS WEEK:

R74: [sc2tog, sc in next 21 sc] around (264 sc)

R75-80: sc around (264 sc)

Remember, kids, buy all the thread you need ahead of time because dyelots are impossible to match!

As you can see, I've got a very tall lid coming along. You... might want to reduce how many spiral rounds there are between each reduction round. My weird mathy plans are going to end up with a very, very tall lid. perhaps comically tall...

Then again, more lid = more chances to embellish later.

Perhaps I will add an amigurumi as a cute accessory later...

Or maybe not. We'll have to see if I can get the darn thing finished first!!! When we finish, I'll ask what/if I should add.

For now, though, I'm going to watch my cat sleep, brush my teeth, and then go curl up with my To Do list for tomorrow.

And boy are y'all gonna hear about that tomorrow lol!

In any case, though, Go Enjoy Something!

FC