Fiber Monday

 

In Which I Have Had A Bear Of A Time lol

Yes, I am late again. No I have no regrets. I have been working very hard on a way to make a ribbed bottom lid for this project that didn't involve 1) overabundant rippling, 2) single crochet ribbing like on a cuff, and/or 3) too much math.

It took... an embarrassingly long time.

Like until literally 45 minutes ago.

But here is what we have so far!

Looks kind of like a jar from this angle!

A hinge?

A closer look at the hinge/freestanding crochet.

My first... bad attempt at a lid!

The Current, Much Better Lid!

Here is the pattern from start to current:

Round 1: sc 6 into magic ring (6 sc)
R2: 2sc around (12 sc)
R3: [2sc, sc] around (18 sc)
R4: [sc, 2sc, sc] (24 sc)
R5: [2sc, sc in next 3 sts] (30 sc)
R6: sc around (30 sc)
R7: [sc in next 2 sts, 2sc, sc in next 2 sts] around (36 sc)
R8: [2sc, sc in next 5 sts] around (42 sc)
R9: [sc in next 3 sts, 2sc, sc in next 3 sts] around (48 sc)
R10: [2sc, sc in next 7 sts] around (54 sts)
R11: [sc in next 4 sts, 2sc, sc in next 4 sts] around (60 sc)
R12-13: sc around (60 sc)
R14: [2sc, sc in next 9 sts] around (66 sc)
R15: [sc in next 5 sts, 2sc, sc in next 5 sts] around (72 sc)
R16: [2sc, sc in next 11 sts] around (78 sc)
R17: [sc in next 6 sts, 2sc, sc in next 6 sts] around (84 sc)
R18: [2sc, sc in next 13 sts] around (90 sc)
R19-21: sc around (90 sc)
R22: [sc in next 7 sts, 2sc, sc in next 7 sts] around (96 sc)
R23: [2sc, sc in next 15 sts] around (102 sc)
R24: [sc in next 8 sts, 2sc, sc in next 8 sts] around (108 sc)
R25: [2sc, sc in next 17 sts] around (114 sc)
R26: [sc in next 9 sts, 2sc, sc in next 9 sts] around (120 sc)
R27-30: sc around (120 sc)
R31: [2sc, sc in next 19 sts] around (126 sc)
R32: [sc in next 10 sts, 2sc, sc in next 10 sts] around (132 sc)
R33: [2sc, sc in next 21 sts] around (138 sc)
R34: [sc in next 11 sts, 2sc, sc in next 11 sts] around (144 sc)
R35: [2sc, sc in next 23 sts] around (150 sc)
R36-40: sc around (150 sc)
R41: [sc 2 together, sc 23] around (144 sc)
R42-47: sc around (144 sc)
R48: [sc 11, sc 2 together, sc 11] around (138 sc)
R49-55: sc around (138 sc)
R56: [sc 2 together, sc 21] around (132 sc)
R57-64: sc around (132sc)
R65: [sc 10, sc 2 tog, sc 10] around (126 sc)
R66-74: sc around (126 sc)
R75: [sc 2 tog, sc 19] around (120 sc)
R76-84: sc around (120 sc)
R85: sc around, sl st to first sc (120 sc)

R86: ch3 (counts as 1^st dc), dc in each sc around, sl st in top of ch3 (120 sc)
R87: ch3 (counts as 1^st dc), dc in next 10 dc; yarn over, insert hook into next dc, pull through 1 loop, yarn over, pull through 2 loops, yarn over, pull through 2 loops (does not count as 1^st foundation dc), foundation dc next 96 stitches, then (being careful not to twist) dc in the 12^th dc from the end of the round, dc to the end of the round (24 dc, 96 foundation dc = 120 dc); sl st to top of ch3, fasten off.

You should now have something that looks like a hinged ring or a handle attached to an odd, pear-shaped pouch. Now we’ll begin the underside of the lid (this is going to be weird, I’m sorry).

Form a magic ring from the same color as you’ve been using. I use a double-magic-ring for added security but you can start this in the round however you like.

R1: ch3 (counts as 1^st dc here and throughout), dc 11 in ring, sl st to the top of the ch3 (12dc)
R2: ch3, fpdc in same dc, (dc in next dc, fpdc in same dc) around, sl st to top of ch3 (12dc, 12fpdc = 24st)
R3: ch3, dc in next st, fpdc in fpdc (dc in next 2 st, fpdc in fpdc) around, sl st to top of ch3 (24dc, 12fpdc = 36st)
R4: ch3, dc in next 2 sts, fpdc in fpdc (dc in next 3 sts, fpdc in fpdc) around, sl st to top of ch3 (36dc, 12fpdc = 48st)
R5: ch3, dc in next 3 sts, fpdc in fpdc (dc in next 4 sts, fpdc in fpdc) around, sl st to top of ch3 (48dc, 12fpdc = 60st)
R6: ch3, dc in next 4 sts, fpdc in fpdc (dc in next 5 sts, fpdc in fpdc) around, sl st to top of ch3 (60dc, 12fpdc = 72st)
R7: ch3, dc in next 5 sts, fpdc in fpdc (dc in next 6 sts, fpdc in fpdc) around, sl st to top of ch3 (72dc, 12fpdc = 84st)
R8: ch3, dc in next 6 sts, fpdc in fpdc (dc in next 7 sts, fpdc in fpdc) around, sl st to top of ch3 (84dc, 12fpdc = 96st)
R9: ch3, dc in next 7 sts, fpdc in fpdc (dc in next 8 sts, fpdc in fpdc) around, sl st to top of ch3 (96dc, 12fpdc = 108st)
R10: ch3, dc in next 8 sts, fpdc in fpdc (dc in next 9 sts, fpdc in fpdc) around, sl st to top of ch3 (108dc, 12fpdc = 120st)

This takes us to the 120 stitches necessary to attach this ribbed bottom-lid to our weird hinge/handle-looking flap bit next week!

Any guesses as to what we're making yet?

I'm really looking forward to the next few bits, since they should fly along (I'm hoping I can manage the math so it's not as big an issue lol), and soon we'll be introducing a second color!!!

I mean... you could do this as a monochrome, but I don't see why you'd want to...

You may have seen my twitter grumblings earlier today about this lid, by the way. I have struggled with this thing! I had no idea how to do it and it took several tutorials for different spoked-wheel-shaped things for me to wrap my head around it. The final tutorial I followed was what gave me the actual repetitions for the spokes, and it's the Knit-A-Square Wheel Spoke Square pattern! I just extrapolated what a bigger center for that square would look like and made the whole lid be that basic pattern!

That being said, I totally frogged that stupid lid about 30 times before I found that pattern and I was just about emotionally finished with this project lol. Thankfully it worked the way I wanted it to, and we'll continue next week!

Good luck out there everyone, and - 

Go Enjoy Something!!!

FC